China wholesale Hidraulic Pump For Bollard Factories – Automatic hydraulic rising bollards with LED and reflective tape – Ruisijie

3 .Overall structure of road bollard products

▲The rising bollard adopts the outer tube protection device, the base controller, etc.

▲The whole machine is fully sealed with IP68 design, and the protection degree of the drive part is in accordance with the provisions of GB4208-2008.

▲220V voltage movement dustproof and waterproof grade IP68 can be used for water, not afraid of rain and guilt, the movement is smooth, powerful, fast, and adapts to any harsh environment.

▲Working temperature: -35° to 80°

▲220V movement rising force: ≥250kg.

▲EPS power supply(battery), voltage 12V, capacity 12AH. The safety voltage and EPS emergency power supply are emergency decompression devices. When the AC220V is not connected, the EPS can be used to complete the rising bollard.

▲There are LED warning lights and reflective identification tapes at the top of the bollard. After the lowering, the lights are hidden and protected, and the vehicle is not crushed. During the operation of the rising bollard, the amount of light is warning, and after the bollard of the rising bollard completely lowered, the warning light on the ground can be clearly observed in the distance at night.

The bollard is attached to the engineering grade anti-cursor, and the width is 50mm.

▲rising speed is 1-5 seconds, which can meet the anti-terrorism and anti-collision requirements. If the time is more than 6 seconds, the time is too long, and the emergency anti-terrorism effect will not be achieved, and the anti-terrorism and anti-collision requirements will not be met.

Impact resistance: There are 4 diameter anti-collision brackets inside, which will extend the impact point to 1000m depth. Blocking the vehicle, the impact force is 200 kilojoules, and the rising bollards installed at the same intersection can be grouped up and down or with the same lift. 

The rising bollard is easy to maintain, the integrated rising road bollard can be disassembled, and the wiring pipe is made of 76 PVC pipe, which is convenient for maintenance after N years. The joint is waterproof. 

1.4 Electro-hydraulic integrated rising and riot-proof bollard, with remote control, manual, intelligent and other rich control rising methods, the bollard are lowered and flush with the ground. The equipment is mainly used for controlling vehicles in and out, and is used to block vehicles, violence or Non-violent out of control collision. Effectively block vehicles from entering forbidden, banned, controlled areas, malicious levels, the device has high anti-collision function, stability and security. The speed of rising is fast, and it is an advanced anti-terrorism and anti-riot, car blocking facility.

The rising bollard adopts hydraulic integrated micro-drive unit to drive the riot-proof road bollard rising, mandatory interception, blocking the vehicle, strong anti-collision ability, simple and flexible operation, stable hydraulic integrated movement, fast and stable movement, no noise, safe and reliable.

The fully automatic hydraulic integrated rising bollard is composed of the main mechanical structure, the hydraulic integrated power unit and the electronic control system.

Main machinery: mainly consists of flange, anti-collision guide rail, load-bearing plate, anti-collision device, stainless steel 304# steel pipe and so on. The whole machine is made of metal structure and has strong load-bearing and anti-collision capability. It is mainly composed of a micro-hydraulic integrated movement, which is the power source of the entire rising bollard system. 

Rising bollard can be used in conjunction with parking lots and vehicle management control systems or separately; specially designed and developed products for sensitive areas to prevent unauthorised vehicles from entering, with high crash worthiness, stability and safety.

Specification table for rising bollard