Traffic Safety Equipment Factory – RICJ remote control tyre killer TK-101-B – Ruisijie

Weight (approximately): 100 kg (for each meter)

Environmental durability: Galvanized steel and yellow-black painted, cabinet powder coated

Structure:Heavy duty

Environmental conditions: -20 °C and +75 °C, %95 non-condensing humidity

Push button box: Raise, lower, stop (optional)

Loop detector: This detector is used for safety

Power Back-up System Options: Backup battery

Automatic Tyre killer is composed by heavy duty spikes that rise from the ground; it operates like an access control barrier, it prevents the passage of unauthorized vehicles or it allows the exit from a supervised area. It can be installed with other access control elements (for example bollards, road blocker or gates) in order to achieve an access control check-point at the highest level of security. Many optionals items are available for Tyre killer in order to configure each individual system.

Security system with steel spikes 80 mm high. Tyre killer uses mechanical movement and counterweights, it is used to allow only the exit of vehicles from a supervised area but to prevent the entrance to unauthorized ones; it is typically used for perimeter protection at the exit of companies, hotels, convention centers and similar. The lenghts available are : 2.000 mm, 3.000 mm, 4.000 mm, 5.000 mm and 6.000 mm.

Electromechanical Tyre Killer ( Flush Mount )  is a part of vehicle access control systems in which a vehicle without permission cannot enter. Tyres of the unpermitted vehicle splits open immediately, therefore the vehicle moves only a few more meters and is stopped. Jaws of the tyre killer move all together. Drive unit is placed to one end of the tyre killer; it stands above the ground level and is a complete assembly with the body. In this way, both smooth transmission of motion and minimum effect of external factors are achieved.